For this module we are required to produce two contrasting tracks by exploring a wide range of hardware equipment. In lesson over the next couple of months I’ll be learning and experimenting with lots of different types of hardware with the end result of me having a high level of understanding of the equipment to then be able to produce the tracks.
My idea for the first track will be compiling a large amount of audio recorded within studio sessions, from in class as well as booking out the studio by myself. From the all the audio I have curated, i’ll then be putting them into blank project to use as an arrangement, edit and mixing tool. I’ll be keeping it as close to the original hardware recordings as possible as this is what’s required in the module brief.
For my final composition, i’ll be doing a live performance purely using hardware. my idea so far is to use 1 or two modular racks, a synth (maybe the Prophet 8 or the Korg Minilog), a drum machine and possibly some FX units. I’ll be syncing all the clocks together to make sure everything is in time, then i’ll record myself performing live and also record the audio into Ableton.
Today I went into the studio to add the finishing touches to my first modular track. I had done the majority of it in my first session (which I have previously made a blog post about) so today was all about just making sure I was completely happy with it.
Right now i’m just going to be explaining my process from start to finish on how I made this track. I had previously made where I made a project on my laptop on Logic just using software, to then go into the studio and try and recreate elements of this idea on hardware which is exactly what I did. Although I had made this plan, the hardware track turned out to be fairly different but it definitely helped me get an idea down quicker.
I recreated the main melody using the Plaits module and sequencing it through the Eloquencer. I got the pattern down on the sequencer and pitched it to right key, ran it through a reverb module, and then recorded roughly about 10-15 of the same pattern using almost every sound I could get from the Plaits. For the drums, I recorded individual one shots from a drum module so I could take those one shots and create a drum pattern in my DAW.
I then sifted through the Plaits recording to find the exact sound I knew would be best for this track, and then built the drum beat around that. Click the link below to hear the finished project.
For my second track, I decided to go through with doing a live performance. My original plan was to book out two modular racks, the Drumbrute, the TR-09, the Prophet 8, and Kork Minilog which is exactly what I did. Although, after I had already collected my hardware and got into the studio I realised the studio I was in didn’t have a ID interface and only a Focusrite. Therefore, I was only able to have to inputs so I had to think on my feet.
Out of all the equipment, I decided to go through with using the Drumbrute as my drum and 808 source on one of the inputs, and for my melodies/FX sounds I used two of the exact same modular racks which I used the Plaits modules as the sound source and the Eloquencer as my sequencer.
I began by patching the clock output from the Drumbrute into the clock input on the Eloquencer so I could have my drums and all my synth sounds synced to 118 bpm. I then patched all 4 Plaits modules into 4 separate sequence tracks on the Eloquencer so I could programme each sound individually and then outputted those individual channels into a mixer. I wanted to have some reverb and/or delay being applied to some of my synth sounds, so I sent one of the Plaits modules outputs to an FX unit first and then to the mixer so I could add reverb/delay. As I only had two FX units, I sent two Plaits into one FX unit by using a headphone splitter. the only downfall to this was that now I had the same effect on two completely different sounds and that the volume level on the mixer now also controlled both of these sounds.
I didn’t want both sounds playing throughout the whole of track, my intentions were to bring them in and out gradually as the track progressed. I therefore came to a conclusion to overcome this problem; on the Eloquencer there’s a mute function that allows you to mute whichever sequence you choose, so I then just muted/un-muted the tracks as I needed to.
Finally, I proceeded to create a drum pattern using the Drumbrute, which I have to say is my favourite drum machine that i’ve used before. I used every drum available on the Drumbrute so I could have a full varied drum pattern. Once I was happy with the loop I had created, I started my live recording and gradually built the track up, bringing elements in and out and really just having fun.
Watch this video below to see some of the live performance.
This week I booked out the studio for a long session to start the production of my first track. I downloaded a whole load of samples that i’ve curated over the past month by using modular racks, hardware synths and drum machines, and put them into an Ableton project to sort through them. After about an hour, I had picked out a load of drum hits, synth sounds and FX that I loved and started to arrange them into a track.
I only used Ableton as an editing tool to arrange my drums, synths and fx as we are required to stay as close to the source sound as possible. I managed to arrange all of these into a structured track over the next 4-5 hours and made huge progress. I took a a video at the beginning of the session to explain my process through this but unfortunately forgot to take one later on, so to see how I started off please watch the linked video below.
This is the second week in a row now that i’ve been experimenting with modular racks and i’m really getting comfortable with it. I feel confident with patching and especially confident using one particular rack which includes: the ‘Eloquencer’ ( an incredible sequencer made by ‘Winter Modular’ that has a huge variety of features to alter your sounds), Two ‘Plaits’ (these are voltage controlled sound sources made by ‘Mutable Instruments’. They have a vast variety of different sounds and each sound is massively customisable) and few other modules. After the first week, I watched a couple tutorials on Youtube on how to use the Eloquencer so I’ll put links at the bottom to this tutorial and a link to each module so you’re able to check them out for yourselves.
Myself and three of my class mates had a massive session using the Arturia Drumbrute, the euro rack I described above, the Moog Sub Phatty and the Arturia Beatstep Pro sequencer and recorded everything over a 3 hour period into Ableton.
We used the Drumbrute as drum source and as the clock to control the BPM of every other bit of hardware we had so everything could be sequenced in time with each other. To be able to record components separately we took the outputs of each piece of hardware and routed it through the patch bay and then chose the correct settings in Ableton. This was especially useful for the Drumbrute as the kick, snares, hi-hats and FM drum all have seperate outputs. The reason for recording everything separately was so that we could chop bits of audio from the the individual sound for our final compositions with ease.
Check out these videos from our session to see all the weird and wonderful sounds we created!
This week we started learning modular synthesis in class which has been my favourite type of synthesis i’ve ever experimented with. Sound design is something I spend extensive amounts of time learning, and modular synths have always been something i’ve been fascinated so this was very exciting for me.
We got into the studio as a group, and got to grips about learning how to use modular, alongside the Drumbrute and a Korg synth. We managed to get some really nice drum pattern and amazing sound synth sequences happening. Knowing that we would be using these, I watched some videos the night before so when I came in for the lesson I was fully prepared to get a track going.
Check out some tutorials I watched below and some videos of what we got up to in the session.
This week, we learnt a very unique way of synthesis, called ‘no input mixing’; this means creating a feedback loop to make some incredibly interesting and dirty synth sounds. We first got taught a very simple chain to create feedback loops, but you can add as many bits of hardware as you want to this chain.
The simple form of doing this is by having a mixer, routing the output of a bus send from that channel into the input of the same channel and then increasing the volume of the bus send. This just creating a constant noise where the tone of that sound can be durastically changed by adjusting the EQ levels on the channel, but cannot be shaped.
To shape this sound, we added the Drumbrute into the chain of the feedback loop. By programming drum hits into the sequencer on the drum machine it would completely change the shape of feedback loop. We found that using the kick drum especially was amazing to get some big distorted bass sounds. Check out this video below for an idea of the full set up.
Below is a tutorial on how to make a simple feedback loop. To make it more complex, simply adding other elements into the chain before getting the FX send 1.
Below here is what we got from our feedback loops.